Add dummy app, rspec helper files, and routing tests

Gemfile.lock

@@ -1,7 +1,7 @@
 PATH
   remote: .
   specs:
-    calligraphy (0.2.0)
+    calligraphy (0.2.1)
       rails (~> 5.0)
 
 GEM
@@ -93,10 +93,6 @@ GEM
       rake (>= 0.8.7)
       thor (>= 0.18.1, < 2.0)
     rake (12.3.0)
-    rspec (3.7.0)
-      rspec-core (~> 3.7.0)
-      rspec-expectations (~> 3.7.0)
-      rspec-mocks (~> 3.7.0)
     rspec-core (3.7.0)
       rspec-support (~> 3.7.0)
     rspec-expectations (3.7.0)
@@ -105,6 +101,14 @@ GEM
     rspec-mocks (3.7.0)
       diff-lcs (>= 1.2.0, < 2.0)
       rspec-support (~> 3.7.0)
+    rspec-rails (3.7.2)
+      actionpack (>= 3.0)
+      activesupport (>= 3.0)
+      railties (>= 3.0)
+      rspec-core (~> 3.7.0)
+      rspec-expectations (~> 3.7.0)
+      rspec-mocks (~> 3.7.0)
+      rspec-support (~> 3.7.0)
     rspec-support (3.7.0)
     sprockets (3.7.1)
       concurrent-ruby (~> 1.0)
@@ -113,6 +117,7 @@ GEM
       actionpack (>= 4.0)
       activesupport (>= 4.0)
       sprockets (>= 3.0.0)
+    sqlite3 (1.3.13)
     thor (0.20.0)
     thread_safe (0.3.6)
     tzinfo (1.2.4)
@@ -126,7 +131,8 @@ PLATFORMS
 
 DEPENDENCIES
   calligraphy!
-  rspec
+  rspec-rails (~> 3.7.2)
+  sqlite3 (~> 1.3.13)
 
 BUNDLED WITH
    1.16.0

calligraphy.gemspec

@@ -13,10 +13,13 @@ Gem::Specification.new do |s|
   s.homepage    = 'http://www.github.com/eanlain/calligraphy'
   s.license     = 'MIT'
 
+  s.required_ruby_version = ">= 2.2.2"
+
   s.files       = Dir['lib/**/*', 'LICENSE', 'README.md']
   s.test_files  = Dir['spec/**/*']
 
   s.add_dependency 'rails', '~> 5.0'
 
-  s.add_development_dependency 'rspec'
+  s.add_development_dependency 'rspec-rails', '~> 3.7.2'
+  s.add_development_dependency 'sqlite3', '~> 1.3.13'
 end

spec/dummy/Rakefile

@@ -0,0 +1,6 @@
+# Add your own tasks in files placed in lib/tasks ending in .rake,
+# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake.
+
+require_relative 'config/application'
+
+Rails.application.load_tasks

spec/dummy/app/assets/config/manifest.js

@@ -0,0 +1,4 @@
+
+//= link_tree ../images
+//= link_directory ../javascripts .js
+//= link_directory ../stylesheets .css

spec/dummy/app/assets/javascripts/application.js

@@ -0,0 +1,13 @@
+// This is a manifest file that'll be compiled into application.js, which will include all the files
+// listed below.
+//
+// Any JavaScript/Coffee file within this directory, lib/assets/javascripts, vendor/assets/javascripts,
+// or any plugin's vendor/assets/javascripts directory can be referenced here using a relative path.
+//
+// It's not advisable to add code directly here, but if you do, it'll appear at the bottom of the
+// compiled file. JavaScript code in this file should be added after the last require_* statement.
+//
+// Read Sprockets README (https://github.com/rails/sprockets#sprockets-directives) for details
+// about supported directives.
+//
+//= require_tree .

spec/dummy/app/assets/stylesheets/application.css

@@ -0,0 +1,15 @@
+/*
+ * This is a manifest file that'll be compiled into application.css, which will include all the files
+ * listed below.
+ *
+ * Any CSS and SCSS file within this directory, lib/assets/stylesheets, vendor/assets/stylesheets,
+ * or any plugin's vendor/assets/stylesheets directory can be referenced here using a relative path.
+ *
+ * You're free to add application-wide styles to this file and they'll appear at the bottom of the
+ * compiled file so the styles you add here take precedence over styles defined in any other CSS/SCSS
+ * files in this directory. Styles in this file should be added after the last require_* statement.
+ * It is generally better to create a new file per style scope.
+ *
+ *= require_tree .
+ *= require_self
+ */

spec/dummy/app/controllers/application_controller.rb

@@ -0,0 +1,3 @@
+class ApplicationController < ActionController::Base
+  protect_from_forgery with: :exception
+end

spec/dummy/app/models/application_record.rb

@@ -0,0 +1,3 @@
+class ApplicationRecord < ActiveRecord::Base
+  self.abstract_class = true
+end

spec/dummy/app/views/layouts/application.html.erb

@@ -0,0 +1,14 @@
+<!DOCTYPE html>
+<html>
+  <head>
+    <title>Dummy</title>
+    <%= csrf_meta_tags %>
+
+    <%= stylesheet_link_tag    'application', media: 'all' %>
+    <%= javascript_include_tag 'application' %>
+  </head>
+
+  <body>
+    <%= yield %>
+  </body>
+</html>

spec/dummy/bin/bundle

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__)
+load Gem.bin_path('bundler', 'bundle')

spec/dummy/bin/rails

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+APP_PATH = File.expand_path('../config/application', __dir__)
+require_relative '../config/boot'
+require 'rails/commands'

spec/dummy/bin/rake

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+require_relative '../config/boot'
+require 'rake'
+Rake.application.run

spec/dummy/bin/setup

@@ -0,0 +1,38 @@
+#!/usr/bin/env ruby
+require 'pathname'
+require 'fileutils'
+include FileUtils
+
+# path to your application root.
+APP_ROOT = Pathname.new File.expand_path('../../', __FILE__)
+
+def system!(*args)
+  system(*args) || abort("\n== Command #{args} failed ==")
+end
+
+chdir APP_ROOT do
+  # This script is a starting point to setup your application.
+  # Add necessary setup steps to this file.
+
+  puts '== Installing dependencies =='
+  system! 'gem install bundler --conservative'
+  system('bundle check') || system!('bundle install')
+
+  # Install JavaScript dependencies if using Yarn
+  # system('bin/yarn')
+
+
+  # puts "\n== Copying sample files =="
+  # unless File.exist?('config/database.yml')
+  #   cp 'config/database.yml.sample', 'config/database.yml'
+  # end
+
+  puts "\n== Preparing database =="
+  system! 'bin/rails db:setup'
+
+  puts "\n== Removing old logs and tempfiles =="
+  system! 'bin/rails log:clear tmp:clear'
+
+  puts "\n== Restarting application server =="
+  system! 'bin/rails restart'
+end

spec/dummy/bin/update

@@ -0,0 +1,29 @@
+#!/usr/bin/env ruby
+require 'pathname'
+require 'fileutils'
+include FileUtils
+
+# path to your application root.
+APP_ROOT = Pathname.new File.expand_path('../../', __FILE__)
+
+def system!(*args)
+  system(*args) || abort("\n== Command #{args} failed ==")
+end
+
+chdir APP_ROOT do
+  # This script is a way to update your development environment automatically.
+  # Add necessary update steps to this file.
+
+  puts '== Installing dependencies =='
+  system! 'gem install bundler --conservative'
+  system('bundle check') || system!('bundle install')
+
+  puts "\n== Updating database =="
+  system! 'bin/rails db:migrate'
+
+  puts "\n== Removing old logs and tempfiles =="
+  system! 'bin/rails log:clear tmp:clear'
+
+  puts "\n== Restarting application server =="
+  system! 'bin/rails restart'
+end

spec/dummy/config.ru

@@ -0,0 +1,5 @@
+# This file is used by Rack-based servers to start the application.
+
+require_relative 'config/environment'
+
+run Rails.application

spec/dummy/config/application.rb

@@ -0,0 +1,18 @@
+require_relative 'boot'
+
+require 'rails/all'
+
+Bundler.require(*Rails.groups)
+require "calligraphy"
+
+module Dummy
+  class Application < Rails::Application
+    # Initialize configuration defaults for originally generated Rails version.
+    config.load_defaults 5.1
+
+    # Settings in config/environments/* take precedence over those specified here.
+    # Application configuration should go into files in config/initializers
+    # -- all .rb files in that directory are automatically loaded.
+  end
+end
+

spec/dummy/config/boot.rb

@@ -0,0 +1,5 @@
+# Set up gems listed in the Gemfile.
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../../Gemfile', __dir__)
+
+require 'bundler/setup' if File.exist?(ENV['BUNDLE_GEMFILE'])
+$LOAD_PATH.unshift File.expand_path('../../../lib', __dir__)

spec/dummy/config/database.yml

@@ -0,0 +1,25 @@
+# SQLite version 3.x
+#   gem install sqlite3
+#
+#   Ensure the SQLite 3 gem is defined in your Gemfile
+#   gem 'sqlite3'
+#
+default: &default
+  adapter: sqlite3
+  pool: <%= ENV.fetch("RAILS_MAX_THREADS") { 5 } %>
+  timeout: 5000
+
+development:
+  <<: *default
+  database: db/development.sqlite3
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  <<: *default
+  database: db/test.sqlite3
+
+production:
+  <<: *default
+  database: db/production.sqlite3

spec/dummy/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require_relative 'application'
+
+# Initialize the Rails application.
+Rails.application.initialize!

spec/dummy/config/environments/development.rb

@@ -0,0 +1,54 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports.
+  config.consider_all_requests_local = true
+
+  # Enable/disable caching. By default caching is disabled.
+  if Rails.root.join('tmp/caching-dev.txt').exist?
+    config.action_controller.perform_caching = true
+
+    config.cache_store = :memory_store
+    config.public_file_server.headers = {
+      'Cache-Control' => "public, max-age=#{2.days.seconds.to_i}"
+    }
+  else
+    config.action_controller.perform_caching = false
+
+    config.cache_store = :null_store
+  end
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  config.action_mailer.perform_caching = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+
+  # Suppress logger output for asset requests.
+  config.assets.quiet = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+
+  # Use an evented file watcher to asynchronously detect changes in source code,
+  # routes, locales, etc. This feature depends on the listen gem.
+  # config.file_watcher = ActiveSupport::EventedFileUpdateChecker
+end

spec/dummy/config/environments/production.rb

@@ -0,0 +1,91 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Attempt to read encrypted secrets from `config/secrets.yml.enc`.
+  # Requires an encryption key in `ENV["RAILS_MASTER_KEY"]` or
+  # `config/secrets.yml.key`.
+  config.read_encrypted_secrets = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = 'http://assets.example.com'
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Mount Action Cable outside main process or domain
+  # config.action_cable.mount_path = nil
+  # config.action_cable.url = 'wss://example.com/cable'
+  # config.action_cable.allowed_request_origins = [ 'http://example.com', /http:\/\/example.*/ ]
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Use the lowest log level to ensure availability of diagnostic information
+  # when problems arise.
+  config.log_level = :debug
+
+  # Prepend all log lines with the following tags.
+  config.log_tags = [ :request_id ]
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Use a real queuing backend for Active Job (and separate queues per environment)
+  # config.active_job.queue_adapter     = :resque
+  # config.active_job.queue_name_prefix = "dummy_#{Rails.env}"
+  config.action_mailer.perform_caching = false
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Use a different logger for distributed setups.
+  # require 'syslog/logger'
+  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
+
+  if ENV["RAILS_LOG_TO_STDOUT"].present?
+    logger           = ActiveSupport::Logger.new(STDOUT)
+    logger.formatter = config.log_formatter
+    config.logger    = ActiveSupport::TaggedLogging.new(logger)
+  end
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+end

spec/dummy/config/environments/test.rb

@@ -0,0 +1,42 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure public file server for tests with Cache-Control for performance.
+  config.public_file_server.enabled = true
+  config.public_file_server.headers = {
+    'Cache-Control' => "public, max-age=#{1.hour.seconds.to_i}"
+  }
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+  config.action_mailer.perform_caching = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

spec/dummy/config/initializers/assets.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Add additional assets to the asset load path.
+# Rails.application.config.assets.paths << Emoji.images_path
+# Add Yarn node_modules folder to the asset load path.
+# Rails.application.config.assets.paths << Rails.root.join('node_modules')
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in the app/assets
+# folder are already added.
+# Rails.application.config.assets.precompile += %w( admin.js admin.css )

spec/dummy/config/initializers/cookies_serializer.rb

@@ -0,0 +1,5 @@
+# Be sure to restart your server when you modify this file.
+
+# Specify a serializer for the signed and encrypted cookie jars.
+# Valid options are :json, :marshal, and :hybrid.
+Rails.application.config.action_dispatch.cookies_serializer = :json

spec/dummy/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

spec/dummy/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json]
+end
+
+# To enable root element in JSON for ActiveRecord objects.
+# ActiveSupport.on_load(:active_record) do
+#   self.include_root_in_json = true
+# end

spec/dummy/config/puma.rb

@@ -0,0 +1,56 @@
+# Puma can serve each request in a thread from an internal thread pool.
+# The `threads` method setting takes two numbers: a minimum and maximum.
+# Any libraries that use thread pools should be configured to match
+# the maximum value specified for Puma. Default is set to 5 threads for minimum
+# and maximum; this matches the default thread size of Active Record.
+#
+threads_count = ENV.fetch("RAILS_MAX_THREADS") { 5 }
+threads threads_count, threads_count
+
+# Specifies the `port` that Puma will listen on to receive requests; default is 3000.
+#
+port        ENV.fetch("PORT") { 3000 }
+
+# Specifies the `environment` that Puma will run in.
+#
+environment ENV.fetch("RAILS_ENV") { "development" }
+
+# Specifies the number of `workers` to boot in clustered mode.
+# Workers are forked webserver processes. If using threads and workers together
+# the concurrency of the application would be max `threads` * `workers`.
+# Workers do not work on JRuby or Windows (both of which do not support
+# processes).
+#
+# workers ENV.fetch("WEB_CONCURRENCY") { 2 }
+
+# Use the `preload_app!` method when specifying a `workers` number.
+# This directive tells Puma to first boot the application and load code
+# before forking the application. This takes advantage of Copy On Write
+# process behavior so workers use less memory. If you use this option
+# you need to make sure to reconnect any threads in the `on_worker_boot`
+# block.
+#
+# preload_app!
+
+# If you are preloading your application and using Active Record, it's
+# recommended that you close any connections to the database before workers
+# are forked to prevent connection leakage.
+#
+# before_fork do
+#   ActiveRecord::Base.connection_pool.disconnect! if defined?(ActiveRecord)
+# end
+
+# The code in the `on_worker_boot` will be called if you are using
+# clustered mode by specifying a number of `workers`. After each worker
+# process is booted, this block will be run. If you are using the `preload_app!`
+# option, you will want to use this block to reconnect to any threads
+# or connections that may have been created at application boot, as Ruby
+# cannot share connections between processes.
+#
+# on_worker_boot do
+#   ActiveRecord::Base.establish_connection if defined?(ActiveRecord)
+# end
+#
+
+# Allow puma to be restarted by `rails restart` command.
+plugin :tmp_restart

spec/dummy/config/routes.rb

@@ -0,0 +1,4 @@
+Rails.application.routes.draw do
+  calligraphy_resource :test
+  calligraphy_resource :webdav, resource_class: Calligraphy::FileResource
+end

spec/dummy/config/secrets.yml

@@ -0,0 +1,32 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key is used for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+# You can use `rails secret` to generate a secure secret key.
+
+# Make sure the secrets in this file are kept private
+# if you're sharing your code publicly.
+
+# Shared secrets are available across all environments.
+
+# shared:
+#   api_key: a1B2c3D4e5F6
+
+# Environmental secrets are only available for that specific environment.
+
+development:
+  secret_key_base: fe8b1115c3f6118db2e9f7bbd4a0f93930122d1bdef9ada02ae55980d6a14fbf919b02af010408dc6e7456ceb28faafb9f34ecbce28230dafadb0177541ba94f
+
+test:
+  secret_key_base: 276136c8ffad50817d3e1dcc7a84dd129105108f1c8e920f46b9b98b74943298637e5261fa66868baa50c1a170fcfb99dfb56f5bd33ec1b4bfd8eb34edcedb16
+
+# Do not keep production secrets in the unencrypted secrets file.
+# Instead, either read values from the environment.
+# Or, use `bin/rails secrets:setup` to configure encrypted secrets
+# and move the `production:` environment over there.
+
+production:
+  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>

spec/dummy/config/spring.rb

@@ -0,0 +1,6 @@
+%w(
+  .ruby-version
+  .rbenv-vars
+  tmp/restart.txt
+  tmp/caching-dev.txt
+).each { |path| Spring.watch(path) }

spec/dummy/db/schema.rb

@@ -0,0 +1,15 @@
+# This file is auto-generated from the current state of the database. Instead
+# of editing this file, please use the migrations feature of Active Record to
+# incrementally modify your database, and then regenerate this schema definition.
+#
+# Note that this schema.rb definition is the authoritative source for your
+# database schema. If you need to create the application database on another
+# system, you should be using db:schema:load, not running all the migrations
+# from scratch. The latter is a flawed and unsustainable approach (the more migrations
+# you'll amass, the slower it'll run and the greater likelihood for issues).
+#
+# It's strongly recommended that you check this file into your version control system.
+
+ActiveRecord::Schema.define(version: 0) do
+
+end

spec/dummy/public/404.html

@@ -0,0 +1,67 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>The page you were looking for doesn't exist (404)</title>
+  <meta name="viewport" content="width=device-width,initial-scale=1">
+  <style>
+  .rails-default-error-page {
+    background-color: #EFEFEF;
+    color: #2E2F30;
+    text-align: center;
+    font-family: arial, sans-serif;
+    margin: 0;
+  }
+
+  .rails-default-error-page div.dialog {
+    width: 95%;
+    max-width: 33em;
+    margin: 4em auto 0;
+  }
+
+  .rails-default-error-page div.dialog > div {
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #BBB;
+    border-top: #B00100 solid 4px;
+    border-top-left-radius: 9px;
+    border-top-right-radius: 9px;
+    background-color: white;
+    padding: 7px 12% 0;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+
+  .rails-default-error-page h1 {
+    font-size: 100%;
+    color: #730E15;
+    line-height: 1.5em;
+  }
+
+  .rails-default-error-page div.dialog > p {
+    margin: 0 0 1em;
+    padding: 1em;
+    background-color: #F7F7F7;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #999;
+    border-bottom-left-radius: 4px;
+    border-bottom-right-radius: 4px;
+    border-top-color: #DADADA;
+    color: #666;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+  </style>
+</head>
+
+<body class="rails-default-error-page">
+  <!-- This file lives in public/404.html -->
+  <div class="dialog">
+    <div>
+      <h1>The page you were looking for doesn't exist.</h1>
+      <p>You may have mistyped the address or the page may have moved.</p>
+    </div>
+    <p>If you are the application owner check the logs for more information.</p>
+  </div>
+</body>
+</html>

spec/dummy/public/422.html

@@ -0,0 +1,67 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>The change you wanted was rejected (422)</title>
+  <meta name="viewport" content="width=device-width,initial-scale=1">
+  <style>
+  .rails-default-error-page {
+    background-color: #EFEFEF;
+    color: #2E2F30;
+    text-align: center;
+    font-family: arial, sans-serif;
+    margin: 0;
+  }
+
+  .rails-default-error-page div.dialog {
+    width: 95%;
+    max-width: 33em;
+    margin: 4em auto 0;
+  }
+
+  .rails-default-error-page div.dialog > div {
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #BBB;
+    border-top: #B00100 solid 4px;
+    border-top-left-radius: 9px;
+    border-top-right-radius: 9px;
+    background-color: white;
+    padding: 7px 12% 0;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+
+  .rails-default-error-page h1 {
+    font-size: 100%;
+    color: #730E15;
+    line-height: 1.5em;
+  }
+
+  .rails-default-error-page div.dialog > p {
+    margin: 0 0 1em;
+    padding: 1em;
+    background-color: #F7F7F7;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #999;
+    border-bottom-left-radius: 4px;
+    border-bottom-right-radius: 4px;
+    border-top-color: #DADADA;
+    color: #666;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+  </style>
+</head>
+
+<body class="rails-default-error-page">
+  <!-- This file lives in public/422.html -->
+  <div class="dialog">
+    <div>
+      <h1>The change you wanted was rejected.</h1>
+      <p>Maybe you tried to change something you didn't have access to.</p>
+    </div>
+    <p>If you are the application owner check the logs for more information.</p>
+  </div>
+</body>
+</html>

spec/dummy/public/500.html

@@ -0,0 +1,66 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>We're sorry, but something went wrong (500)</title>
+  <meta name="viewport" content="width=device-width,initial-scale=1">
+  <style>
+  .rails-default-error-page {
+    background-color: #EFEFEF;
+    color: #2E2F30;
+    text-align: center;
+    font-family: arial, sans-serif;
+    margin: 0;
+  }
+
+  .rails-default-error-page div.dialog {
+    width: 95%;
+    max-width: 33em;
+    margin: 4em auto 0;
+  }
+
+  .rails-default-error-page div.dialog > div {
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #BBB;
+    border-top: #B00100 solid 4px;
+    border-top-left-radius: 9px;
+    border-top-right-radius: 9px;
+    background-color: white;
+    padding: 7px 12% 0;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+
+  .rails-default-error-page h1 {
+    font-size: 100%;
+    color: #730E15;
+    line-height: 1.5em;
+  }
+
+  .rails-default-error-page div.dialog > p {
+    margin: 0 0 1em;
+    padding: 1em;
+    background-color: #F7F7F7;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #999;
+    border-bottom-left-radius: 4px;
+    border-bottom-right-radius: 4px;
+    border-top-color: #DADADA;
+    color: #666;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+  </style>
+</head>
+
+<body class="rails-default-error-page">
+  <!-- This file lives in public/500.html -->
+  <div class="dialog">
+    <div>
+      <h1>We're sorry, but something went wrong.</h1>
+    </div>
+    <p>If you are the application owner check the logs for more information.</p>
+  </div>
+</body>
+</html>

spec/rails_helper.rb

@@ -0,0 +1,57 @@
+# This file is copied to spec/ when you run 'rails generate rspec:install'
+require 'spec_helper'
+ENV['RAILS_ENV'] ||= 'test'
+require File.expand_path('../dummy/config/environment', __FILE__)
+# Prevent database truncation if the environment is production
+abort("The Rails environment is running in production mode!") if Rails.env.production?
+require 'rspec/rails'
+# Add additional requires below this line. Rails is not loaded until this point!
+
+# Requires supporting ruby files with custom matchers and macros, etc, in
+# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
+# run as spec files by default. This means that files in spec/support that end
+# in _spec.rb will both be required and run as specs, causing the specs to be
+# run twice. It is recommended that you do not name files matching this glob to
+# end with _spec.rb. You can configure this pattern with the --pattern
+# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
+#
+# The following line is provided for convenience purposes. It has the downside
+# of increasing the boot-up time by auto-requiring all files in the support
+# directory. Alternatively, in the individual `*_spec.rb` files, manually
+# require only the support files necessary.
+#
+# Dir[Rails.root.join('spec/support/**/*.rb')].each { |f| require f }
+
+# Checks for pending migrations and applies them before tests are run.
+# If you are not using ActiveRecord, you can remove this line.
+ActiveRecord::Migration.maintain_test_schema!
+
+RSpec.configure do |config|
+  # Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
+  # config.fixture_path = "#{::Rails.root}/spec/fixtures"
+
+  # If you're not using ActiveRecord, or you'd prefer not to run each of your
+  # examples within a transaction, remove the following line or assign false
+  # instead of true.
+  config.use_transactional_fixtures = true
+
+  # RSpec Rails can automatically mix in different behaviours to your tests
+  # based on their file location, for example enabling you to call `get` and
+  # `post` in specs under `spec/controllers`.
+  #
+  # You can disable this behaviour by removing the line below, and instead
+  # explicitly tag your specs with their type, e.g.:
+  #
+  #     RSpec.describe UsersController, :type => :controller do
+  #       # ...
+  #     end
+  #
+  # The different available types are documented in the features, such as in
+  # https://relishapp.com/rspec/rspec-rails/docs
+  config.infer_spec_type_from_file_location!
+
+  # Filter lines from Rails gems in backtraces.
+  config.filter_rails_from_backtrace!
+  # arbitrary gems may also be filtered via:
+  # config.filter_gems_from_backtrace("gem name")
+end

spec/routing/calligraphy_resource_routes_spec.rb

@@ -0,0 +1,115 @@
+require 'rails_helper'
+
+RSpec.describe 'calligraphy_resource', :type => :routing do
+  describe 'routes to WebDavRequests controller' do
+    context 'for OPTIONS requests' do
+      it do
+        expect(options: '/test/one').to route_to(
+          controller: 'calligraphy/rails/web_dav_requests',
+          action: 'invoke_method',
+          resource: 'one',
+        )
+      end
+    end
+
+    context 'for GET requests' do
+      it do
+        expect(options: '/test/two').to route_to(
+          controller: 'calligraphy/rails/web_dav_requests',
+          action: 'invoke_method',
+          resource: 'two',
+        )
+      end
+    end
+
+    context 'for PUT requests' do
+      it do
+        expect(put: '/test/three').to route_to(
+          controller: 'calligraphy/rails/web_dav_requests',
+          action: 'invoke_method',
+          resource: 'three',
+        )
+      end
+    end
+
+    context 'for DELETE requests' do
+      it do
+        expect(delete: '/test/four').to route_to(
+          controller: 'calligraphy/rails/web_dav_requests',
+          action: 'invoke_method',
+          resource: 'four',
+        )
+      end
+    end
+
+    context 'for COPY requests' do
+      it do
+        expect(copy: '/test/five').to route_to(
+          controller: 'calligraphy/rails/web_dav_requests',
+          action: 'invoke_method',
+          resource: 'five',
+        )
+      end
+    end
+
+    context 'for MOVE requests' do
+      it do
+        expect(move: '/test/six').to route_to(
+          controller: 'calligraphy/rails/web_dav_requests',
+          action: 'invoke_method',
+          resource: 'six',
+        )
+      end
+    end
+
+    context 'for MKCOL requests' do
+      it do
+        expect(mkcol: '/test/seven').to route_to(
+          controller: 'calligraphy/rails/web_dav_requests',
+          action: 'invoke_method',
+          resource: 'seven',
+        )
+      end
+    end
+
+    context 'for PROPFIND requests' do
+      it do
+        expect(propfind: '/test/eight').to route_to(
+          controller: 'calligraphy/rails/web_dav_requests',
+          action: 'invoke_method',
+          resource: 'eight',
+        )
+      end
+    end
+
+    context 'for PROPPATCH requests' do
+      it do
+        expect(proppatch: '/test/nine').to route_to(
+          controller: 'calligraphy/rails/web_dav_requests',
+          action: 'invoke_method',
+          resource: 'nine',
+        )
+      end
+    end
+
+    context 'for LOCK requests' do
+      it do
+        expect(lock: '/test/ten').to route_to(
+          controller: 'calligraphy/rails/web_dav_requests',
+          action: 'invoke_method',
+          resource: 'ten',
+        )
+      end
+    end
+
+    context 'for UNLOCK requests' do
+      it do
+        expect(unlock: '/test/eleven').to route_to(
+          controller: 'calligraphy/rails/web_dav_requests',
+          action: 'invoke_method',
+          resource: 'eleven',
+        )
+      end
+    end
+  end
+end

spec/spec_helper.rb

@@ -0,0 +1,92 @@
+# This file was generated by the `rails generate rspec:install` command. Conventionally, all
+# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
+# The generated `.rspec` file contains `--require spec_helper` which will cause
+# this file to always be loaded, without a need to explicitly require it in any
+# files.
+#
+# Given that it is always loaded, you are encouraged to keep this file as
+# light-weight as possible. Requiring heavyweight dependencies from this file
+# will add to the boot time of your test suite on EVERY test run, even for an
+# individual file that may not need all of that loaded. Instead, consider making
+# a separate helper file that requires the additional dependencies and performs
+# the additional setup, and require it from the spec files that actually need
+# it.
+#
+# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
+RSpec.configure do |config|
+  # rspec-expectations config goes here. You can use an alternate
+  # assertion/expectation library such as wrong or the stdlib/minitest
+  # assertions if you prefer.
+  config.expect_with :rspec do |expectations|
+    # This option will default to `true` in RSpec 4. It makes the `description`
+    # and `failure_message` of custom matchers include text for helper methods
+    # defined using `chain`, e.g.:
+    #     be_bigger_than(2).and_smaller_than(4).description
+    #     # => "be bigger than 2 and smaller than 4"
+    # ...rather than:
+    #     # => "be bigger than 2"
+    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
+  end
+
+  # rspec-mocks config goes here. You can use an alternate test double
+  # library (such as bogus or mocha) by changing the `mock_with` option here.
+  config.mock_with :rspec do |mocks|
+    # Prevents you from mocking or stubbing a method that does not exist on
+    # a real object. This is generally recommended, and will default to
+    # `true` in RSpec 4.
+    mocks.verify_partial_doubles = true
+  end
+
+  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
+  # have no way to turn it off -- the option exists only for backwards
+  # compatibility in RSpec 3). It causes shared context metadata to be
+  # inherited by the metadata hash of host groups and examples, rather than
+  # triggering implicit auto-inclusion in groups with matching metadata.
+  config.shared_context_metadata_behavior = :apply_to_host_groups
+
+  # This allows you to limit a spec run to individual examples or groups
+  # you care about by tagging them with `:focus` metadata. When nothing
+  # is tagged with `:focus`, all examples get run. RSpec also provides
+  # aliases for `it`, `describe`, and `context` that include `:focus`
+  # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
+  config.filter_run_when_matching :focus
+
+  # Allows RSpec to persist some state between runs in order to support
+  # the `--only-failures` and `--next-failure` CLI options. We recommend
+  # you configure your source control system to ignore this file.
+  # config.example_status_persistence_file_path = "spec/examples.txt"
+
+  # Limits the available syntax to the non-monkey patched syntax that is
+  # recommended. For more details, see:
+  #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
+  #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
+  #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
+  config.disable_monkey_patching!
+
+  # Many RSpec users commonly either run the entire suite or an individual
+  # file, and it's useful to allow more verbose output when running an
+  # individual spec file.
+  if config.files_to_run.one?
+    # Use the documentation formatter for detailed output,
+    # unless a formatter has already been configured
+    # (e.g. via a command-line flag).
+    config.default_formatter = "doc"
+  end
+
+  # Print the 10 slowest examples and example groups at the
+  # end of the spec run, to help surface which specs are running
+  # particularly slow.
+  # config.profile_examples = 10
+
+  # Run specs in random order to surface order dependencies. If you find an
+  # order dependency and want to debug it, you can fix the order by providing
+  # the seed, which is printed after each run.
+  #     --seed 1234
+  config.order = :random
+
+  # Seed global randomization in this process using the `--seed` CLI option.
+  # Setting this allows you to use `--seed` to deterministically reproduce
+  # test failures related to randomization by passing the same `--seed` value
+  # as the one that triggered the failure.
+  Kernel.srand config.seed
+end